NOTE:
Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in
Before working inside your
working inside your
computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Prerequisites
Remove the battery.
Procedure
1. Remove the screw (M2x5) that secures the optical-drive assembly to the base cover.
2. Using a plastic scribe, push to release the optical-drive assembly from the optical-drive bay.
3. Slide and remove the optical-drive assembly out of the optical-drive bay.
4. Remove the screw (M2x3) that secures the optical-drive bracket to the optical drive.
5. Remove the optical-drive bracket.
Removing the optical drive
computer. After working inside your computer, follow the instructions in
After
www.dell.com/
Removing the optical drive
5
13