Chapter 18: Replacing The I/O Board; Procedure; Post-Requisites - Dell Inspiron 14 3000 Service Manual

NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in Before working inside your
working inside your computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.

Procedure

1. Using the alignment posts, place the I/O board on the palm-rest assembly and snap the I/O board into place.
2. Slide the I/O-board cable into the connector on the I/O board and close the latch to secure the cable.

Post-requisites

1. Replace the hard drive.
2. Replace the base cover.
3. Replace the keyboard.
4. Replace the optical drive.
5. Replace the battery.
Replacing the I/O board
computer. After working inside your computer, follow the instructions in After
www.dell.com/
Replacing the I/O board
18
31