Ortech OL-1H Instruction Manual page 3

LED Security Lights
MODEL OL-1H
INSTALLATION GUIDE CAUTION
Adjusting Your Light Heads
Your light heads can be adjusted by turning the individual light head to desired position.
You can also adjust your light head up and down to your desired position.
TROUBLESHOOTING
If the light does NOT come on:
• Check if the power is turned ON at the switch and breaker
• Check if the product is properly wired
• Check if the line voltage is correct (110V-240V)
MAINTENANCE
To clean the surface of the light, use mild soap and water.
DO NOT use scouring pads, powders, steel wool or any other abrasive materials.
info@ortechindustries.com
www.ortechindustries.com
ORTECH reserves the right to modify at any time, without notice,
any or all of our product's features, designs, components and
specifications to meet market changes.
13376 Comber Way 375 Admiral Blvd
Mississauga
Surrey BC V3W 5V9
,
ON L5T 2N1
Instruction Manual
1-888-543-6473
1-888-541-6474