JHCTech WPPC-H1780T User Manual page 45

User's Manual
Setup Prompt Timeout
This item sets the wait time for the Setup shortcut. If you do not press the Setup shortcut within the set
time, it will continue to boot.
Bootup Numlock State
This item determines if the NumLock key is active or inactive at system start-up time. The default value
is On, which is a digital lock on when the system starts. Set to Off, the keypad is in cursor control state at
startup.
Show Full Logo
This item shows the vendor logo on the startup screen.
[Enabled]: Display static LOGO screen at startup;
[Disabled]: Display self-test information at start.
Boot Option #1/#2
These items show the boot priorities.
#1 is the highest priority boot device in the boot option.
Hard Drive BBS Priorities
Figure 3.22
This item sets the hard disk that can be used as the boot device. If there are multiple hard disks, you
should select the priority of these hard disks in the item. The highest priority hard disk will be displayed
in Boot Option #1.
38