Table of Contents
Advertisement
2.4 Installation
2.4.1 HDD/SSD Installation
Step 1: unscrew the 2 screws on the HDD/SSD bracket of the rear panel.
Step 2: remove the HDD/SSD stent.
Step 3: load the HDD/SSD into the bracket and tighten the 4 screws on the left and right sides to fix the
HDD/SSD.
Step 4: push the bracket with HDD/SSD into the slot and tighten the 2 screws on the bracket.
Figure 2. 14
Figure 2. 15
15
User's Manual
Advertisement
Table of Contents
