Ethernet Connector - JHCTech BRAV-7520 User Manual

 6*USB3.1 Type A 、2*USB2.0 TypeA
 2*DP, 1*VGA
 3*LAN: RJ45
 4*COM: DB9
 1*Audio、1*Mic 3.5mm phone jake
 16-bit DIO: 2*10 Pin phoenix
 1*Remote SW: 1*2 Pin phoenix
 1*I-port: Optional 16-bit GPIO, USB2.0 or Mini PCIe and M.2 I/O ports(such as serial ports)
 2*PCIeX8、2*PCIeX4
 4*2.5"SATA3 tray

2.3.1 Ethernet Connector

The BRAV-7520/BRAV-7521 is equipped with 2*Intel I210AT chips and 1*Intel I219LM for
10/100/1000Mbps Ethernet controllers. The product provides 3*RJ45, with LED indicators on the front
side to show its Active/Link status (Green LED) and Speed status (yellow LED).
Table 2.1 for pin assignments.
Table 2.1: RJ-45 Connector pin assignments
Pin
1
2
3
4
10/100/1000BaseT Signal
TX+(10/100), LAN_DA+(GHz)
TX-(10/100), LAN_DA-(GHz)
RX+(10/100), LAN_DB+(GHz)
LAN_DC+(GHz)
Figure 2. 5
Pin 10/100/1000BaseT Signal
LAN_DC-(GHz)
5
RX-(10/100), LAN_DB-(GHz)
6
LAN_DD-(GHz)
7
LAN_DD-(GHz)
8
15
User's Manual