Ethernet Connector (Lan) - JHCTech BRAV-7501 User Manual

The Front panel I/O ports consist of the following:
 2*3.5" SATA SSD/HDD bay (BRAV-7501/S001)
 4*2.5" SATA SSD/HDD trays (BRAV-7501/S002)
 2*USB2.0
 Power SW

2.3.1 Ethernet Connector (LAN)

The BRAV-7501 is equipped with 2*Intel I210AT chips and 1*Intel I219LM for 10/100/1000Mbps
Ethernet controllers. The product provides 3*RJ45, with LED indicators on the front side to show its
Active/Link status (Green LED) and Speed status (yellow LED).
Table 2.1 for pin assignments.
Table 2.1: RJ-45 Connector pin assignments
Pin
1
2
3
4
10/100/1000BaseT Signal
TX+(10/100), LAN_DA+(GHz)
TX-(10/100), LAN_DA-(GHz)
RX+(10/100), LAN_DB+(GHz)
LAN_DC+(GHz)
Figure 2. 4
Figure 2. 5
Pin 10/100/1000BaseT Signal
LAN_DC-(GHz)
5
RX-(10/100), LAN_DB-(GHz)
6
LAN_DD-(GHz)
7
LAN_DD-(GHz)
8
12
User's Manual