Table of Contents
Advertisement
User's Manual
2.4 Installation
2.4.1 HDD/SSD Installation (BRAV-7521)
Step 1: Press the HDD Tray Switch button to open the HDD tray;
Step 2: Install a 2.5-inch hard disk into the hard disk bracket;
Step 3: Put the hard drive tray back into the hard drive case;
2.4.2 HDD/SSD Installation (BRAV-7520)
Step 1: unscrew the 2 screws on the HDD/SSD bracket of the rear panel.
Step 2: remove the HDD/SSD stent.
Step 3: load the HDD/SSD into the bracket and tighten the 4 screws on the left and right sides to fix the
HDD/SSD.
Step 4: push the bracket with HDD/SSD into the slot and tighten the 2 screws on the bracket.
29
Advertisement
Table of Contents
