Vectors To Final - Garmin GNS 480 Pilot's Manual

Vectors To Final

Let' s take a second look at the "VOR 22" approach into Billard Municipal (KTOP). Instead of following the
DME arc, ATC tells you to expect vectors onto the final approach course. There are several ways to select
"vectors to final" (VTF) with the GNS 480. The two options below normally require the least workload to
accomplish:
• When the approach is first selected, choose "VECTORS" from the transitions field.
• Load a full approach — including the IAF from the transitions window.
• Then, when cleared, press PROC and select VTF (Vectors-To-Final).
NOTE: If a transition with a procedure turn or course reversal in holding is selected, and ATC
subsequently vectors you to the final approach course, VTF mode will automatically remove the
procedure turn and make the in-bound course active for the intercept.
To select "VECTORS" from the transitions field:
1. Press the PROC key and select the "VOR 22" approach.
2. From the transitions field, select "VECTORS."
3. Review the modified flight plan and execute it.
To activate vectors-to-final from the procedures page:
Regardless of what transition was selected, press the VTF function smart key to activate vectors to final.
Basic Operation
Procedures
When you are in the Terminal area, you
may be directed to fly a vector to final
approach.
1. Press FN and then PROC.
2. Press VTF.
3. Follow the guidance from the GNS 480 as
the inbound course to the Final Approach
Fix (FAF) is now active.
87