Furuno FM-8800D Operator's Manual page 87

5. Press the ENT key and key in each ID or AREA followed by the ENT key.
To enter area
a) Enter latitude (degrees) and 1 for north or 2 for south of reference point.
b) Enter longitude (degrees) and 1 for east or 2 for west.
c) Enter southerly degrees of area.
d) Enter easterly degrees of area.
e) Press the ENT key.
6. TCmd1 is selected; press the ENT key.
7. Choose SIMPLEX TP, DUPLEX TP, DATA or FAX as appropriate followed by
pressing the ENT key. If you chose SIMPLEX, DUPLEX, or FAX, NO INFO
appears in the Tcmd2 field. Go to step 10. If you chose DATA, go to the next
step.
8. Tcmd2 is selected; press the ENT key.
9. Choose an appropriate data type and press the ENT key.
10. Choose CH and press the ENT key. The following window appears.
11. Choose SELECT CH with the CH knob (or up / down arrow key) and press
the ENT key.
In case of NO INFO, there is no channel information.
1: N/E
°
°
-- --- ↓
E
N
SIMPLEX TP
UPLEX TP
ATA
FAX
V. 21
V. 22
V. 22 bis
V. 23
V. 26 bis
SELECT CH
NO INFO
SIMP CHANNEL
15
06
08 16
09 17
10 67
11 68
69
12
13 71
14 72
2: S/W
°
→
°
--
--
V. 26 ter
V. 27 ter
V. 32
73
74
75
76
77
87
88
4. BASIC SETUP
4-9