Furuno FM-8800D Operator's Manual page 67

8. Press the CALL key more than three seconds to transmit position request.
The following display appears. The timer counts down until a response is
received.
Waiting for
acknowledgement.
SHIP ID : 123456789
ROUTINE
TCmd1 : POSITION REQUEST
TCmd2 : NO INFO
TIME TO GO : 3M30 S
9. When an acknowledge call is received, the following display appears and the
audio alarm sounds.
10. Press the CANCEL key to silence the alarm. The display looks as below.
You can now confirm position of other ship.
11. When "No response! Try calling again?" is displayed;
Re-send call: Push the ENT key followed by the CALL key.
Cancel call: Press the CANCEL key.
3. DSC OPERATION FOR NON-DISTRESS CASES
Position acknowledge
received.
FROM : 123456789
ROUTINE
TCmd1 : POSITION
TCmd2 : NO INFO
°
POS : 12 34'N 123
AT 12 : 34
CANCEL ALARM
** Received Message **
APR01/ 04 12 : 34
POSITION ACK
FROM : 123456789
ROUTINE
TCmd1 : POSITION
TCmd2 : NO INFO
°
POS : 12 34'N 123
AT 12 : 34
PRESS ENT
If a file is registered,
its registration name
is displayed.
If not, this field is blank.
°
45'E
ECC : OK
°
45'E
3-23