Furuno FM-8800D Operator's Manual page 61

7. Choose SIMPLEX TP, DUPLEX TP, DATA or FAX as appropriate followed by
pressing the ENT key. If you chose SIMPLEX, DUPLEX, or FAX, the NO
INFO appears in the Tcmd2 field. Go to the step 10. If you chose DATA, go to
the next step.
8. TCmd2 is selected; press the ENT key.
V. 21
V. 22
V. 22 bis
V. 23
V. 26 bis
9. Choose the data type and press the ENT key.
10. Choose CH and press the ENT key. The following window appears.
11. Choose SELECT CH or NO INFO as appropriate followed by pressing the
ENT key. If you chose SELECT CH, the following channel list appears. (The
example is the international, duplex channel list.) Rotate the CH knob (or
press up / down arrow key) to choose a channel and press the ENT key.
12. Press the CALL key more than three seconds to transmit the call.
After transmitting the message, the screen changes to standby display.
3. DSC OPERATION FOR NON-DISTRESS CASES
V. 26 ter
V. 27 ter
V. 32
SELECT CH
NO INFO
DUP CHANNEL
78
20 28
01
79
21 60
02
22 61 80
03
62 81
04 23
63 82
05 24
64 83
07 25
65 84
18 26
66 85
19 27
86
3-17