Furuno FM-8800D Operator's Manual page 64

3. DSC OPERATION FOR NON-DISTRESS CASES
8. TCmd1 is selected; press the ENT key.
9. Choose SIMPLEX TP, DUPLEX TP, DATA or FAX as appropriate followed by
pressing the ENT key. If you chose SIMPLEX, DUPLEX, or FAX, NO INFO
appears in the Tcmd2 field. Go to step 12. If you chose DATA, go to the next
step.
10. TCmd2 is selected; press the ENT key.
11. Choose the data type and press the ENT key.
12. Choose CH and press the ENT key. The following window appears.
13. Choose SELECT CH or NO INFO as appropriate followed by pressing the
ENT key. If you chose SELECT CH, the following channel list appears. (The
example is the international, duplex channel list.) Rotate the CH knob (or
press up / down arrow key) to choose a channel and press the ENT key.
14. Press the CALL key more than three seconds to transmit the message. After
the call is transmitted, the standby display appears with channel specified.
3-20
SIMPLEX TP
UPLEX TP
ATA
FAX
V. 21
V. 22
V. 22 bis
V. 23
V. 26 bis
SELECT CH
NO INFO
DUP CHANNEL
28
01 20
60
02 21
61
03 22
62
04 23
63
05 24
64
07 25
65
18 26
66
19 27
V. 26 ter
V. 27 ter
V. 32
78 86
79
80
81
82
83
84
85