Furuno FM-8800D Operator's Manual page 47

9. Choose SIMPLEX TP, DUPLEX TP, DATA or FAX as appropriate followed by
pressing the ENT key. If you chose SIMPLEX, DUPLEX or FAX, NO INFO
appears in the Tcmd2 field. Go to step 12. If you chose DATA, go to the next
step.
10. TCmd2 is selected; press the ENT key.
V. 21
V. 22
V. 22 bis
V. 23
V. 26 bis
11. Choose the data type and press the ENT key.
12. Choose CH and press the ENT key. The following window appears.
13. Choose SELECT CH or NO INFO as appropriate followed by pressing the
ENT key. If you chose SELECT CH, the following channel list appears. (The
example shown is the international, duplex channel list.) Rotate the CH knob
(or press up / down arrow key) to choose a channel you wish to communicate
over and then press the ENT key.
14. Press the CALL key more than three seconds to transmit the message.
3. DSC OPERATION FOR NON-DISTRESS CASES
V. 26 ter
V. 27 ter
V. 32
SELECT CH
NO INFO
DUP CHANNEL
28 78
01 20
60 79
02 21
61 80
03 22
62 81
04 23
63 82
05 24
64 83
07 25
65 84
18 26
66 85
19 27
86
3-3