Auto Ack Setup - Furuno FM-8800D Operator's Manual

4.2

Auto ACK Setup

The Auto Ack Menu enables/disables automatic acknowledgement of ship, coast,
position and polling calls.
Comply status
Set of [5 ACQ]
AUTO ACK
MANUAL ACK
To set COMPLY TYPE
1. Press the MENU key.
2. Rotate the CH knob (or press up / down arrow key) to choose AUTO ACK and
press the ENT key. The following menu appears.
3. COMPLY STATUS is selected; press the ENT key. The following setting
window appears.
4. Rotate the CH knob (or press up / down arrow key) to choose ABLE or
UNABLE as automatic acknowledgement reply to each call.
5. Press the ENT key.
Note: Automatic acknowledge is automatically disabled when RX call
Can send acknowledge
automatically.
Can send acknowledge
**** AUTO ACK MENU ****
COMPLY STATUS ABLE
UNABLE REASON
POSITION CALL ON
POLLING CALL
contains error, as required by law. Further, automatic acknowledge is
disabled in case of OFF HOOK.
ABLE
manually
NO REASON
ON
ABLE
UNABLE
4. BASIC SETUP
UNABLE
Can send UNABLE
automatically.
Can send UNABLE
manually.
4-3