Furuno NX-700B Operator's Manual page 5

Safety information for the Installer
WARNING WARNING
Do not open the equipment
unless totally familiar with
electrical circuits and
service manual.
Only qualified personnel
ELECTRICAL
should work inside the
SHOCK
equipment.
HAZARD
Turn off the power at the mains switch-
board before beginning the installation.
Fire, electrical shock or serious injury can
result if the power is left on or is applied
while the equipment is being installed.
CAUTION CAUTION
Observe the following compass safe
distances to prevent deviation of a
magnetic compass.
NX-700A
Display unit
NX-700B
Receiver unit NX-7001
Attach securely protective
earth to the ship's body.
The protective earth is required
to the power supply to prevent
electrical shock.
iii
Standard Steering
1.45 m
0.95 m
0.30 m 0.30 m
0.75 m
1.15 m