Furuno NX-700B Operator's Manual page 48

4. INSTALLATION
Flush mounting
The display unit can be installed flush mounted in a console or panel by using
the optional flush mount kit.
(For NX-700A)
Type: OP08-19
Name
Mounting metal
Self-tapping screw
Hex. bolt
Spring washer
1. Cut out a hole with dimensions as shown below in the mounting location.
2. Attach the fixing metal to the display unit with two hex. bolts (M8x15,
supplied with optional kit) and spring washers (supplied with optional kit).
3. Fasten six self-tapping screws to fix the display unit to the mounting location.
(For NX-700B)
Type: OP08-20
Name
Mounting metal
Self-tapping screw
Pan head screw
1. Cut out a hole with dimensions as shown below in the mounting location.
2. Attach the fixing metal to the display unit with four pan head screws (M4X12,
supplied with the optional kit).
3. Fasten four self-tapping screws (supplied with the optional kit) to fix the
display unit to the mounting location.
4-2
Code No.: 004-515-260
Type Code No.
08-023-1019 100-326-960
5X20 000-802-081
M8x15 000-862-144
M8 000-864-262
284+0.5
7
4
Fixing hole
Code No.: 004-515-270
Type Code No.
08-023-2011 100-327-010
5x20 000-802-081
M4x12 000-802-130
156+1
155+0.5
Qty Remarks
1
6
2
2
7
275+1
Qty Remarks
1
4
4
4
Fixing hole