Furuno NX-700B Operator's Manual page 34

2. OPERATION
Editing NAVTEX station
Existing NAVTEX station may be edited as follows:
1. Press the MENU/ESC key to show the main menu.
2. Press ▲ or ▼ to choose Service, and then press the ENT key.
3. Press ▲ or ▼ to choose Edit Station List, and then press the ENT key.
4. Press ◄ or ► to choose the NAV area to be changed (01 to 16, EXT).
5. Press the LIST key to choose the frequency to be changed (518kHz, 490kHz
or 4209.5kHz).
6. Press ▲ or ▼ to choose the station, and then press the ENT key.
7. Press ▲ to choose "Edit", and then press ENT key to show the edit window
appears.
8. Edit data as appropriate.
9. Confirm that Save station? is chosen, and then press the ENT key.
10. Press ◄ to choose "YES", and then press the ENT key to erase the edit
window.
11. Press the MENU/ESC key several times to close the menu.
Deleting NAVTEX stations
You may delete unnecessary NAVTEX stations as follows:
1. Press the MENU/ESC key to show the main menu.
2. Press ▲ or ▼ to choose Service, and then press the ENT key.
3. Press ▲ or ▼ to choose Edit Station List, and then press the ENT key.
4. Press ◄ or ► to choose the NAV area to be deleted. (01 to 16, EXT).
5. Press the LIST key to choose the frequency to be deleted (518kHz, 490kHz
or 4209.5kHz).
6. Press ▲ or ▼ to choose the station name to be deleted, and then press ENT
key.
The item window appears.
2-14
Oostende
NavArea
NAV Area
Station Name Station
Latitude
Latitude
Longitude
Longitude
518kHz
Station ID
490kHz
4209.5kHz
Service Area
Range
Save data ?
Edit window (Ex. NAVTEX station Oostende)
Edit
Delete
1
Oostende
51 11'N
2 48'E
ID1: T ID2: - ID3: -
ID1: - ID2: - ID3: -
ID1: A ID2: - ID3: -
55nm