Furuno NX-700B Operator's Manual page 43

Thermal paper (NX-700A only)
When the thermal paper runs out completely, the message "Printer error" (center
of screen) and the
paper as follows.
Name
Thermal paper
1. Turn off the power.
2. Press the button shown below to open the paper holder cover.
3. Peel the tape from the end of new paper.
4. Set the new paper in the paper container in the direction shown below.
New paper
5. Pull the end of the paper by 2 to 3 cm (as shown above), and then close the
cover.
3. MAINTENANCE & TROUBLESHOOTING
icon (at the right-hand top corner) appear. Replace the
X
Type
TP058-30CL
Eject button
Tape
Paper holder cover
Code No.
000-154-047
Paper holder
3-3