4.3 PARKING BRAKE LEVER
This lever stops the machine from moving when it has been parked.
There are two positions:
4.3 PARKING BRAKE LEVER
This lever stops the machine from moving when it has been parked.
There are two positions:
A
B
4.4 SPEED CHANGE LEVER
3
2
1
4
Reverse must be engaged when the machine has stopped.
4.5 CUTTING HEIGHT ADJUSTING LEVER
4.5
of the stop notches.
–The brake is engaged by pressing the pedal (☛4.2)
right down and moving the lever to position «B».
When you take your foot off the pedal it will be
blocked by the lever in the down position.
– To disengage the parking brake, press the
pedal(☛4.2).The lever will return to position «A».
This lever has six positions for the four forward
gears, the neutral position «N», and reverse
«R».
–
To change gear, press the pedal (☛4.2)
N
halfway down and move the lever as per
the indications on the label.
R
There are five positions for this lever, shown as
«1» to «5» on the plate, which correspond to
various cutting heights from 3.0 to 7.0
–
To go from one position to another,
move the lever sideways and put it back in one
cm.
13