Table of Contents
Advertisement
3.3 FITTING THE SEAT
1
3
3.4 FITTING THE BLADE ENGAGEMENT LEVER
3
3.5 CONNECTING THE BATTERY
1
2
safe handling and disposal.
2
Fit the seat (1) onto the plate (2)
using the screws (3)
3
1
Fit the end of the lever (1) on the projecting part
2
of the pin (2) and fix it all by tightening the
screw (3) and nut (4)
4
1. Position the battery (1) in its compartment under the
seat;
2. Connect the battery connector (2) to the machine
connector (3);
3. Recharge the battery by following the instructions in the
Manual(☛6.2.3).
3
Never start the engine until the battery is fully charged!
Follow the battery manufacturer's instructions regarding
10
Advertisement
Table of Contents
