Interventions On The Machine; Cutting Deck Alignment - Racing RAC62PR-3 Original Instructions Manual

6.2.3 Battery
To ensure long life to the battery it is essential to keep it carefully maintained.
The machine battery must always be charged:
1
battery could permanently damage the battery elements.
– A flat battery must be recharged as soon as possible.
constant voltage. Other recharging systems can irreversibly damage the battery.
The machine comes with a connector (1) for recharging, near the battery, to be connected
to the connector for the battery-charger supplied (if included) or available on request (☛
9.2).
battery charger. For its use:

6.3 INTERVENTIONS ON THE MACHINE

6.3.1 Cutting deck alignment

The cutting deck should be properly set to obtain a good cut.
– before using the machine for the first time after purchase;
– before leaving the machine for a prolonged period of disuse;
– before starting up the machine after a prolonged period of disuse.
– to ensure long life to the battery it is essential to keep it carefully
maintained. Failure in following the procedure or in charging the
Recharging must be done using a battery charger at
This connector must only be used for connecting to the
If the cut is uneven, check the tire pressure.
If this is not sufficient to achieve an even cut,
please contact your Dealer for the adjustment
of the alignment of the cutting deck.
29