4.6 LEVER ENGAGEMENT AND BRAKE OF BLADE
A
B
4.11 KEY IGNITION SWITCH
This key operated control has three positions:
4.12 ACCELERATOR LEVER
Regulates the engine's r.p.m. The positions are indicated on a plate showing the
following symbols :
4.6
The lever has two positions, as shown on the plate:
–If the blade is engaged when safety conditions have
not been complied with, the engine shuts down and
cannot be restarted ( ☛5.2).
– In disengaging the blade (Pos. «A»), a brake is
simultaneously activated which stops their rotation within a
few seconds.
4.11
《stop》everything is switched off;
《on》 activates all parts;
《start》engages the starter
On being released at the «START» position, the key will
automatically return to «ON».
4.12
14