Table of Contents
Advertisement
4.3 PARKING BRAKE LEVER
This lever stops the machine from moving when it has been parked.
There are two positions:
A
B
4.4 SPEED CHANGE LEVER
3
2
4
4.5 CUTTING HEIGHT ADJUSTING LEVER
4.5
of the stop notches.
–The brake is engaged by pressing the pedal (☛4.2)
right down and moving the lever to position «B».
When you take your foot off the pedal it will be
blocked by the lever in the down position.
– To disengage the parking brake, press the
pedal(☛4.2).The lever will return to position «A».
This lever has six positions for the four forward
gears, the neutral position «N», and reverse
«R».
–
1
N
R
Reverse must be engaged when the machine has stopped.
There are five positions for this lever, shown as
«1» to «5» on the plate, which correspond to
various cutting heights from 3.0 to 7.0
–
move the lever sideways and put it back in one
To change gear, press the pedal (☛4.2)
halfway down and move the lever as per
the indications on the label.
To go from one position to another,
13
cm.
Advertisement
Table of Contents
