Download Print this page
Racing RACTDT5070-1 Instruction Manual

Racing RACTDT5070-1 Instruction Manual

Gasoline lawn mower

Advertisement

Quick Links

ORIGINAL INSTRUCTIONS
GASOLINE LAWNMOWER
RACTDT5070-1
Instruction manual
WARNING: READ THE INSTRUCTIONS BEFORE USE THE TOOL
BUILDER SAS
32, rue Aristide Bergès - ZI 31270 Cugnaux - France
1

Advertisement

loading

Summary of Contents for Racing RACTDT5070-1

  • Page 1 ORIGINAL INSTRUCTIONS GASOLINE LAWNMOWER RACTDT5070-1 Instruction manual WARNING: READ THE INSTRUCTIONS BEFORE USE THE TOOL BUILDER SAS 32, rue Aristide Bergès - ZI 31270 Cugnaux - France...
  • Page 2: Table Of Contents

    CONTENTS 1. SAFETY INSTRUCTIONS 2. YOUR PRODUCT 3. ASSEMBLY 4. FILLING FUEL TANK 5. USE 6. MAINTENANCE AND STORAGE 7. EC DECLARATION...
  • Page 3: Safety Instructions

    1. SAFETY INSTRUCTIONS Instructions • Read the instructions carefully. Be familiar with the controls and proper use of the equipment. • Never allow children to use this mower. If the mower is given to an other people, also give this manual. Also make sure that this person uses this device only after receiving the necessary instructions.
  • Page 4 • Do not tilt the mower when starting the machine or turn on the engine, unless the mower needs to be tilted for starting. In this case, do not tilt it more than absolutely necessary and lift only the part that is furthest away from the user. •...
  • Page 5 feet under the mower deck or in the rear ejection port while the engine is running. • Turn off the engine and remove the spark plug cap in the following cases: Before operating under the mower deck or near the ejection opening. Before any maintenance, repair or verification.
  • Page 6 injury and damage remain. The following hazards may arise in the structure and design of this product: There are risks of injury and property damage due to attachments or broken the sudden impact of hidden objects when using cutting. There are risks of injuries and accidents caused by flying objects. Prolonged use of this product exposes the operator to vibrations and can produce so-called "white finger"...
  • Page 7: Your Product

    Wear protective equipment. Wear eye and hearing protection when using the tool Guarantee sound power level 2. YOUR PRODUCT a. Description...
  • Page 8 5. Fuel tank 12. Lower bar 6. Engine 13. Flap of the lateral discharge 7. Air filter 14. Lateral discharge b. Technical data Model RACTDT5070-1 Nominal power Displacement 173cm³ Max engine speed 2800/min Cutting width 502mm Volume of the collection bag...
  • Page 9: Assembly

    3. ASSEMBLY a. Handles/bar Install the lower handle (2) on the machine and screw it with the provided screws and nuts. Combine the upper handle (1) and the lower handle (2). Place the hook (3) on the right side of the handle. Screw the handle with the two nut knobs and their screws.
  • Page 10 c. Setting of the cutting height According operation to be performed, adjust the desired cutting height; Grasp the lever, pull it to the right and then lower it to decrease the cutting height or raise it to increase the cutting height d.
  • Page 11: Filling Fuel Tank

    4. FILLING FUEL TANK a. Filling tank WARNING! Gasoline is extremely flammable. Store fuel in specially designed cans for this purpose. Fill the fuel tank only outdoors and before starting the engine. Do not smoke when filling the fuel tank or handling fuel. Never open the fuel tank cap and never add fuel while the engine is running or when it is hot.
  • Page 12: Use

    5. USE a. Starting the tool Before starting and using the mower, check for the presence and operation of safety devices. Also, check the condition of the blade and its securing bolt. If necessary, replace or repair defective items. Use only genuine original parts. If possible, mow only when the grass is dry.
  • Page 13 Pull back the starter until you feel resistance and then pull the handle firmly and briskly to turn the engine Repeat the above procedure as necessary until the engine starts. When starting from cold, gradually move the throttle lever to the full throttle position after a few moments of running.
  • Page 14: Maintenance And Storage

    6. MAINTENANCE AND STORAGE Before working on the cutting system of the machine, switch off the engine and remove the spark plug’s cap. a. Cleaning the mower Cut grass is damp. Regular cleaning after each use will ensure better functioning of the mower and reduce the risk of corrosion or seizure.
  • Page 15 recommended as it may cause a build‐up of condensation resulting in corrosion of the mower. Extended shutdown and winter storage Thoroughly clean the mower. Ideally, run the engine outdoors until the fuel tank is empty. Alternatively, empty any remaining fuel using a fuel suction pump. Dispose of discarded fuel safely and responsibly, remembering that petrol vapours can cause explosion or fire.
  • Page 16 positioned precisely on its stand. Tighten the screws connecting all of the components. Make a final visual check that all parts are present and aligned before tightening the fixing bolt very firmly with a wrench while holding the blade firmly in one hand (NB wear suitable gloves). Spark plug Check the spark plug initially after the first five hours of mower use.
  • Page 17 32, rue Aristide Bergès -Z1 31270 Cugnaux - France Tel. +33 (0) 5.34.502.502 Fax: +33 (0) 5.34.502.503 Declares that the machine named below GASOLINE LAWNMOWER RACTDT5070-1 Serial number: Complies with the following European Directives: Machinery Directive 2006/42/EC EMC Directive 2014/30/EU...