Own Settings (Master, Power Synchronization, Monitor) - Furuno NAVNET 3D MFD8/12/BB Installation Manual

-The system will search for sensors on the network. Allow the system to fully perform
the search (which takes about 30 seconds). Do not click the Skip button.
-After the detection, the language selection screen appears. The default language is
English. Use the Cursor Pad and the center click (or the mouse for the MFDBB) then
click on "Next:

3.2.1. Own Settings (Master, Power Synchronization, Monitor)

To set up an MFD as a Master, just set the "DHCP server setting" as "Enable".
Set the "Power synchronization" to enable if you want to use this feature.
46