Advertisement
Entering Mark
1. Press the [MENU] key and the soft key DIS-
PLAY OPTIONS.
2. Press
to select OPERATION MODE.
3. Press the soft key EDIT.
4. Press
to select FISHING.
5. Press the soft key ENTER or the [ENTER]
key.
6. Press the PLOT key to display the plotter
display.
7. Press the [HIDE/SHOW] key to display the
soft key MARK ENTRY.
8. Press the soft key MARK ENTRY.
When the cursor is displayed, a mark which its
shape and color are presetted is entered to
cursor position. When the cursor is not dis-
played, a mark is entered to own ship
position.The mark attributes can be changed
by the soft key MARK EDIT.
Stopping, Restarting
Recording of Track
1. Press the [MENU] key.
2. Press the soft key CHART SETUP OP-
TIONS.
3. Press the soft key TRACK CONTROL.
4. Press the soft key STOP TRACK. NOT
TRACKING indication appears at the bottom
of the display.
To restart recording, press the soft key START
TRACK.
Entering Waypoints at
Own Ship Position
Press the [SAVE/MOB] key with a touch-and-
release action.
Entering Waypoints By
Cursor
1. Press the [WPT/RTE] key.
2. Press the soft key WAYPOINTS.
3. Press the soft key WAYPOINT BY CURSOR
to show the plotter display.
( 0 0 0 5 , T A T A )
P U B . N O . O S E - 4 3 9 4 0 - E
G P - 1 6 5 0 / 1 6 5 0 D
4. Operate the cursor to place the cursor on
the position you want to enter the waypoint.
5. Press the soft key NEW WPT.
6. Press the soft key SAVE.
Registering Routes
1. Press the [WPT/RTE] key.
2. Press the soft key ROUTES.
3. Press the soft key NEW ROUTE.
4. Press the soft key LOCAL LIST or ALPHA
LIST.
5. Press
or
to select a waypoint.
6. Press the soft key ADD WPT.
7. Repeat step 5-7.
8. Press the soft key SAVE.
Setting Destination by
Waypoint Number
1. Place the cursor on the waypoint you want
to go on the plotter display.
2. Press the soft key GO TO WPT.
Cancelling Destination
1. Press the [WPT/RTE] key.
2. Press the soft key LOG.
3. Press
or
to select the waypoint desired.
4. Press the soft key STOP.
5. Press the [ENTER] key to select YES on the
confirmation window.
6. Press the soft key RELEASE to show the
confirmation window.
7. Press the [ENTER] key to select YES.
Setting Arrival Alarm
1. Press the [ALARM] key to show the alarm
menu.
2. Select ARRIVAL ALARM.
3. Press the soft key EDIT.
4. Press
or
to select ON.
5. Key in the alarm range.
6. Press the soft key ENTER.
Silencing audible alarm: [CLEAR] key.
Disabling alarm: Select OFF at step 3 above.
Advertisement
