Shifting The Display; Centering Cursor Position; Centering Own Ship's Position; Stopping/Starting Plotting And Recording Of Track - Furuno GP-150 Operator's Manual

2. TRAC
Cursor turned o
Ship s position (in latitude and longitude or
OPs), speed and course appear on the
display.
Own ship
Own ship position
mark
in latitude and longitude
34q 23.456´ N 135q
W84
2.00nm
Figure2-2 Data display when the cursor is
turned off
2.4 Shi ting the Display
The display can be shifted on the Plotter 1
and Plotter 2 displays, with the C
ON O key. When own ship tracks off the
display it is automatically returned to the
screen center.
1) Press the C SO ON O
off the cursor.
2) Press the cursor pads. The display shifts
in the direction of the cursor pads
pressed.
2-2
D3D 100m
45.678´ E
SAFE
BRG
234q
COG
345q
RNG
123q
nm
SOG
12.3
kt
Course
Speed
SO
key to turn
2. Centering Cursor
Position
1) Press the C SO ON O
on the cursor.
2) Press the cursor pad to position the
cursor.
3) Press the CENTE key.
2. Centering O n Ship s
Position
1) Press the C SO ON O
off the cursor.
2) Press the CENTE key.
Note: When own ship s position reaches an
edge of the screen, the display moves
to set own ship s position center of the
display.
2. Stopping Starting
Plotting and ecording
o Trac
The P-1 0 stores 2,000 points of track and
marks. When the memory becomes full the
oldest track is erased to make room for the
latest.
Procedure
Press the PLOT ON O
recording and plotting of track.
hen plotting is resu ed
"Resuming track plot" appears at the center
of the display for about three seconds.
hen plotting is stopped
"Stopping track plot" appears at the center of
the display for about three seconds and "
appears at the left side of the display. ("
does not appear on the Navigation and Data
displays.)
key to turn
key to turn
key to start stop
H "
H "