Data 2 Description - Furuno NAVNET 3D MFD8/12/BB Installation Manual

Wiring Information
Pin No.
7 Shield
6 Black
5 Red
4 Green
3 Yellow
2 Blue
1 White

2.3.3. DATA 2 Description

DATA2 can be used to connect additional NMEA 0183 instruments. Use the included
cable assembly FRUDD-18AFFM-L180 (FUSA P/N 000-164-608). This included Pig-
Tail Cable has an 18-Pin connector. DATA2 also provides additional Inputs/Outputs
(Buzzer, Event ...). For example, a MOB contact closure input may be connected to PIN
15 and 11*.
*Note that any MFD will interface to virtually any MOB System or Event switch (Point
Save) contact closure signal using these pins.
Color
Shield
GND
12V_OUT
RD1-C
RD1-H
TD1-B
TD1-A
Function
23