Target List - Furuno FAR-28x7 Series Operator's Manual

3.8.2

Target list

The target list provides a comprehensive data display of all ARP (and AIS)
targets being tracked.
Displaying the target list
To display the target list, do the following:
1. Roll the trackball to choose the TARGET LIST box at the right side of the
screen.
2. Push the left button to display the TARGET LIST. ">" in the TCPA means that
the time is greater than 99:59.
3. To scroll the list when there are more than three targets, select 0 NEXT and
then push the wheel or the left button.
Note: To refresh data, choose 9 REFRESH DATA and then push the wheel.
4. Push the right button to close the list.
TARGET LIST box
[TARGET LIST (1/1)]
SORT BY CPA
1 BACK
2 ARP TARGET
No: 001
BRG 16.5°T RNG 2.05 NM
CPA 0.17NM TCPA>99.59M
3 ARP TARGET
No: 002
BRG 19.0°T RNG 2.49 NM
CPA 0.29NM TCPA>99.59M
9 REFRESH DATA
This is not necessary when the sorting method is changed (see next
page); data is automatically updated whenever the sorting method is
changed.
TARGET
LIST
Target list
3. ARP OPERATION
3-15