Table Of Contents - YASKAWA CIMR-SSA Series Instruction Manual

INSTALLATION
WIRING
6
S Lift the cabinet by the base. When moving the unit, never lift by the front
cover.
Otherwise, the main unit may be dropped causing damage to the unit.
S Mount the inverter on nonflammable material (i.e. metal).
Failure to observe this caution can result in a fire.
S When mounting units in an enclosure, install a fan or other cooling device
to keep the intake air temperature below 45_C.
Overheating may cause a fire or damage to the unit.
S Only commence wiring after verifying that the power supply is turned OFF.
Failure to observe this warning can result in an electric shock or a fire.
S Wiring should be performed only by qualified personnel.
Failure to observe this warning can result in an electric shock or a fire.
S When wiring the emergency stop circuit, check the wiring thoroughly
before operation.
Failure to observe this warning can result in personal injury.
S Make sure to ground the ground terminal
(Ground resistance
200V class: 100Ω or less, 400V class: 10Ω or less)
Failure to observe this warning can result in an electric shock or a fire.
CAUTION
. . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . .
WARNING
.
(Ref. page)
. . . . . . . . . . 16
16
16
(Ref. page)
. . . . . . . . . 20
. . . . . . . . . 20
. . . . . . . . . . . . . . . . . 20
. . . . . . . . . 24