Erasing Marks, Lines - Furuno 1824C-BB Operator's Manual

2. Select LINES STYLE, then press the A: EDIT soft key.
LINES STYLE
- - - -
Lines style window
3. Use the Trackball to select line style desired, then press the C: ENTER soft key. The
line style "dot" disables line drawing. Edge of lines is determined by mark shape. For
example, selecting the circle shape will join lines with a circle.
4. Press the MENU key twice to close the menu.

3.7.4 Erasing marks, lines

Erasing an individual mark
1. Operate the Trackball to place the cursor on the mark you want to erase.
2. Press the CLEAR key to erase the mark.
Erasing an individual line
Place the cursor on an end of the line to erase, then press the CLEAR key. Placing the
cursor at the intersecting point of two line segments will erase both line segments.
Erasing marks, lines by area
This feature is not available when the overlay mode is in use.
1. Press the MENU key followed by the A: CHART SETUP, B: TRACKS & MARKS
CONTROL and C: ERASE T & M soft keys to show the ERASE menu.
2. Use the Trackball to select ERASE MARKS BY AREA, then press the A: EDIT soft key.
The menu is erased and the plotter display appears.
3. Use the Trackball to place the cursor at the top left-hand corner of the area which you
want to erase marks and lines from.
4. Press the C: START soft key or the ENTER knob.
MARKS/LINES COLOR YELLOW
MARKS SHAPE
.
LINES STYLE
MARKS SIZE LARGE
SHIP'S TRACK STATUS
TRACKING
TRACK: 1234/2000
MARK : 9/6000
Marks & lines menu
3. PLOTTER OPERATION
MARKS &
LINES
EDIT
A
RETURN
E
3-25