Table of Contents
Advertisement
Safety Decals
1. The following decals are installed to alert operators
to hazards in specific machine areas (See
Figure 4-1.) The decals are for personal safety...
READ AND UNDERSTAND THE DECALS!
a. Keep decals clean by wiping off regularly. Use a
cleaning solution if necessary.
b. Replace missing, damaged or painted over
decals.
1. Read Operator's Manual before operating.
2. Operate only with tractor equipped with
fully enclosed ROPS cab and seat belt.
3. Keep riders off equipment.
4. Make certain everyone is clear before
starting tractor engine and operating.
5. Keep all shields in place.
6. Keep hands, feet and clothing away from
moving parts.
7. Disengage PTO, lower equipment to
ground and stop tractor engine before
leaving operator's platform.
8. Wait for all movement to stop before
servicing.
9. Never lubricate, adjust, unclog or service
equipment with tractor engine running.
Operate only with 540 rpm PTO
All drive line shields must be kept in place.
Operate only with 1000 rpm PTO
All drive line shields must be kept in place.
d5-10p safety decals
366578
Stay clear of rotor
and discharge
area while tractor
engine is running.
017805
017806
Figure 4-1: Safety Decals
OPERATION AND MAINTENANCE
366579
4-3
Advertisement
Table of Contents
