Cbx100/Cbx500 Pinout For Matrix 120 - Datalogic Matrix 120 Product Reference Manual

RAPID CONFIGURATION

CBX100/CBX500 Pinout for Matrix 120™

The table below gives the pinout of the CBX100/CBX500 terminal block connectors. Use
this pinout
means of the CAB-1011 accessory cable:
CBX100/500 Terminal Block Connectors
Input Power
Vdc Power Supply Input Voltage +
GND Power Supply Input Voltage -
Earth Protection Earth Ground
Inputs
+V Power Source - External Trigger
I1A External Trigger A
I1B External Trigger B
-V Power Reference - External Trigger
+V Power Source - Inputs
I1A Input 2 A
(polarity insensitive)
I2B Input 2 B
(polarity insensitive)
-V Power Reference - Inputs
Shield
Cable shield connected to chassis and 17-pin con-
nector shell
Main Interface
RS232
TX
RX
-
-
SGND
a. Do not leave floating, see RS232 Interface for connection details
4 MATRIX 120™
only when the Matrix 120™ reader is connected to the CBX100/CBX500 by
(polarity insensitive)
(polarity insensitive)
Outputs
+V Power Source - Outputs
-V Power Reference - Outputs
O1+ Output 1+
O1- Output 1-
02+ Output 2+
O2- Output 2-
O3A Output 3 (CBX500 only)
Auxiliary Interface
Matrix 120 has no Auxiliary Interface
ID-NET™
Matrix 120 has no ID-NET Interface
RS422 Full-Duplex
TX+
a
RX+
a
TX-
RX-
SGND