Restore Factory Defaults; Diagnostic Alarms - Datalogic Matrix 120 Product Reference Manual

Restore Factory Defaults

In order to return a device to its absolute Factory default parameters (for example
device replacement) it is necessary to use the Restore Factory Defaults command. You
will be prompted to confirm.
All Environment parameters will be restored to Factory default values and any existing
configurations stored on the device will be erased. The device will be reset and there-
fore start in run mode with the factory default configuration.

DIAGNOSTIC ALARMS

By using the DL.CODE Monitor functions from the File menu (or Monitor icon), you can
get information about the state of the reader.
Figure 77 - Diagnostic Alarms
DIAGNOSTIC ALARMS
PRODUCT REFERENCE GUIDE 147