Step 4B - Usb Device Discovery - Datalogic Matrix 120 Product Reference Manual

Step 4B - USB Device Discovery

NOTE
The following configuration procedure assumes that a laptop computer running
DL.CODE is connected to a Matrix 120 factory default reader through the USB port (CAB-
1021). See Step 1 - Connect the System.
1. After the reader is connected to the USB port and boots up successfully, from
2. Find your device in the list by matching its serial number (SN). The USB driver cre-
USB device discovery on a PC using Windows XP SP3 requires particular
attention. See " Windows XP SP3 and Matrix 120™ USB Interface" on page
151 for more information.
DL.CODE, click the Getting Started button to discover it. The unit will be shown in
the network Online Devices list. Matrix 120 devices connected through the USB
interface will not be shown in the Serial Devices list.
ates a virtual Ethernet connection with an IP address that cannot be modified. In
fact, it is easy to see the unit in the list because it is the one without a wrench icon
(used for modifying the IP parameters).
STEP 4 - INSTALLING DL.CODE CONFIGURATION PROGRAM
PRODUCT REFERENCE GUIDE 13