SERIAL CONNECTION
In this layout the data is transmitted to the Host on the main serial interface. The Ether-
net interface can be used for reader configuration by connecting a laptop computer run-
ning DL.CODE.
Data can be transmitted on the RS232 auxiliary interface independently from the main
interface selection to monitor data.
When One Shot or Phase Mode operating mode is used, the reader can be activated by
an External Trigger (for example a pulse from a photoelectric sensor) when the object
enters its reading zone.
10-30 Vdc
External Power for Matrix 120
and I/O Accessories
Matrix 120
All devices always support multiple output channels (i.e. for data monitoring).
CBX
CAB-1011
Figure 54 - Serial Interface Point-to-Point Layout
Main Serial Interface (RS232 or RS422 Full-Duplex)
Optional outputs
External Trigger (for One Shot or Phase Mode)
SERIAL CONNECTION
Host
PRODUCT REFERENCE GUIDE 71