Backup - Datalogic Matrix 120 Product Reference Manual

Backup

To perform a Backup:
1. From the DL.CODE Device menu, select Single Reader Backup (to file on PC).
You will be reminded that configuration in temporary memory will not be saved so you
should save the configuration to the reader before performing Backup.
You will also be asked whether to include the firmware or not.
NOTE
At the end of the backup, DL.CODE shows a message indicating successful completion.
Matrix 120 does not support Firmware backup. Choose "No" in the win-
dow above.
BACKUP AND RESTORE THROUGH DL.CODE
PRODUCT REFERENCE GUIDE 143