Belt Clip/Stand On Parent Unit - Motorola MBP421 User Manual

2.3

Belt clip/stand on parent unit

1. The belt clip/stand attaches to the back of the parent unit and clips into the
2. The unit comes with the accessory fitted in the belt clip position.
3. You can convert it into the desktop position, by simply pulling the back part
locking slots on each side.
NOTE
It will only fit one way, as indicated by UP and the arrows on the inside of the
clip.
of the clip out slightly and then rotating it by half a turn, as shown above.
Getting Started
Belt clip position Desktop position
11