Zoom; Pairing And Replacing Baby Unit(S) - Motorola MBP421 User Manual

3.9

Zoom

1. Press
2. Press and hold

3.10 Pairing and replacing baby unit(s)

3. Press
1. Press MENU/SELECT when the parent unit is not in use.
2. Press
3. Press
You can zoom in or out while viewing an image from the baby unit.
to zoom in.
>
4. Turn on the new baby unit, and then immediately press and hold PAIR until
downward, leftward or rightward correspondingly.
to zoom out.
<
The system comes with baby unit(s) already paired with the parent unit.
You can pair a maximum of four baby units to your parent unit. Each new baby
unit must be paired to the parent unit before use.
To pair and replace a baby unit:
or
- +
or
< >
SELECT. The screen displays
NOTE
If you choose an occupied baby unit slot, the new baby unit will replace the
existing baby unit.
the POWER light turns on.
When pairing is successful, the screen displays
newly paired baby unit.
NOTE
If pairing fails, the screen displays . Try the pairing process again. Only one
baby unit can be paired at a time.
14
, , or to move the zoomed image upward,
+ - < >
to choose .
to choose a desired baby unit slot, then press MENU/
.
, and then the image from the
Using Your Baby Monitor