Pulsar SG108-C Quick Start Manual


Switch 10 ports 10/100/1000 Mb/s
8 PoE ports 10/100/1000 Mb/s (data and power supply)
2 ports 10/100/1000 Mb/s (UP LINK)

30 W for each PoE port, supports devices complaint
with the IEEE802.3af/at (PoE+) standard

Supports auto-learning and auto-aging of MAC
addresses (8K size)

1. Technical description

1.1. General description.

The SG108-C is a complete kit to build the CCTV system based on IP cameras. The switch and power supply unit are
housed in a metal enclosure.
Automatic detection of any devices powered in the PoE/PoE+ standard is enabled at the 1 – 8 ports of the switch. The
UP LINK ports is used for connection of another network device via RJ45 connector. The LEDs at the front panel indicate the
operation status (description in the table below).
The PoE technology ensures a network connection and reduces installation costs by eliminating the need to supply a
separate power cable for each device. This method allows supplying other network devices, such as IP phone, wireless access
point or router.
SG108-C
v1.1
SG108-C 10-ports switch for 4 IP cameras
in the enclosure
Edition: 2 from 14.02.2019
Supercedes the edition: 1 from 16.02.2018
Features
:

LED indication

Metal enclosure – color white RAL 9003

warranty – 2 year from the production date
Example of use .
1
PL
EN**