White Balance Adjustment; Model No. Setting - Panasonic PT-VZ570 Service Manual

SECTION 3 ADJUSTMENTS

1. 7. White balance adjustment

1. Input the gray scale gradation pattern.
2. E nter the service mode (EXTRA OPTION) and select [WHITE
BALANCE ADJUST] and press [ENTER] button to enter the white
balance adjustment mode.
3. Select the adjustment item with [
4. Adjust the white balance of halftone image on the screen with [
u
[ ] buttons.
5. After finishing the adjustment, press [MENU] button to exit the
adjustment mode.
<Note>
The projector can store the white balance level for each picture
mode as shown below. Adjust the white balance for each mode
properly.
Input
Computer Dynamic
Video Dynamic
-- Black board

1. 8. Model no. setting

1. E nter the service mode (EXTRA OPTION) and select [MODEL
NO SETTING] and press [ENTER] button to enter the model no.
setting mode.
2. Select the model no. of the projector with [
press [ENTER] button.
3. After finishing the setting, press [MENU] button to exit the setting
mode.
p q
] [ ] buttons.
Mode
Standard Natural
Standard Cinema
White board
p q
] [ ] buttons and
t
]
ADJ-10