Adjusting The White Balance - Panasonic PT-LC50E Operating Instructions Manual

Adjusting the White Balance

The picture may become over-saturated with red or blue
colour, and the white colour may not be at the desired degree
of whiteness. In such cases, adjust the white balance by the
following procedure.
The procedure and on-screen display as shown below are
based on RGB as the input signal from a personal computer.
• Adjustment procedure
(for white balance adjustment of the red component)
1
Press MENU to
display the menu.
2
Press or
select "White
Balance", and then
ENTER to display
the screen.
3
Press or
select
"R Level".
4
Press or
adjust the R Level
setting.
• The current setting
will be displayed on
the screen by
numerals and a bar.
Downloaded From projector-manual.com Panasonic Manuals
Previous
screen
to
to
R Level
G Level
to
B Level
Standard (Push ENTER)
Continued on the next page...
Picture
White Balance
Synchronization
Function
Language
Information
White Balance
0
0
0
50