Panel Type Setting; Flicker Adjustment - Panasonic PT-VZ570 Service Manual

SECTION 3 ADJUSTMENTS

1. 5. Panel type setting

1. 5. 1. Preparation
Before taking this setting, confirm the type of optical block (L-Type
or R-Type) according to the item "Optical block type check" in the
section 1 "Service Information".
1. 5. 2. Setting procedure
1. E nter the service mode (EXTRA OPTION) and select [PANEL
TYPE SETTING].
2. C hange the panel type to [L] or [R] with [
the optical block type which is installed on the projector.
L: L-Type
R: R-Type
• R efer to the item "5.2.5. Optical block type check" in section 1 for
checking the type of the optical block.

1. 6. Flicker adjustment

1. E nter the service mode (EXTRA OPTION) and select [FLICKER
ADJUST] and press [ENTER] button to enter the flicker adjust-
ment mode.
2. The whole red raster pattern will displayed on the screen when
entering the adjustment mode.
3. Adjust the flicker to be minimum with [
4. Change another adjustment pattern with [
repeat the step 3 above.
Projector provide 3 adjustment patterns "Red", "Green" and "Blue".
5. After finishing the adjustment, press [MENU] button to exit the
adjustment mode.
t u
] [ ] buttons to match
t u
] [ ] buttons.
p q
] [ ] buttons and
ADJ-9