Panasonic PT-VZ570 Service Manual page 9

SECTION 1 SERVICE INFORMATION
r Bottom
r Bottom

Projection direction

Projection direction
14 Control panel and Indicators
14 Control panel and Indicators
15 Lamp cover
The lamp unit is inside.
15 Lamp cover
The lamp unit is inside.
Attention
Attention
f Do not block the ventilation ports (intake and exhaust) of the projector.
f Do not block the ventilation ports (intake and exhaust) of the projector.
r Control panel and Indicators
r Control panel and Indicators
1. 2. Control panel
Power button <v/b>
1
Power button <v/b> Sets the projector to the state where the projector is
1
switched off (standby mode). Also starts projection when
Sets the projector to the state where the projector is
switched off (standby mode). Also starts projection when the power is switched off (standby mode).
the power is switched off (standby mode).
2 Power indicator <ON(G)/STANDBY(R)>
Displays the status of the power.
2 Power indicator <ON(G)/STANDBY(R)>
Displays the status of the power.
3 Lamp indicator <LAMP>
3 Lamp indicator <LAMP> Displays the status of the lamp.
Displays the status of the lamp.
4 Temperature indicator <TEMP>
4 Temperature indicator <TEMP> Displays the status of the internal temperature.
Displays the status of the internal temperature.
5 Ambient Luminance sensor
Detects room's light and select proper image quality.
5 Ambient Luminance sensor
Detects room's light and select proper image quality.
Chapter 1 Preparation - About your projector
Chapter 1 Preparation - About your projector
6
r
6
11
11
INF-3
r Top
Top
14 15
14 15
16 Vertical lens shift dial
Adjusts the vertical position of the projected image.
16 Vertical lens shift dial
Adjusts the vertical position of the projected image.
6 <MENU> button
Displays or hides the main menu. (x page 46)
6 <MENU> button
Displays or hides the main menu. (x page 46)
7 <ENTER> button
Determines and executes an item in the menu screen.
7 <ENTER> button
Determines and executes an item in the menu screen.
8 <INPUT SELECT> button
Switches the input signal to project. (x page 41)
8 <INPUT SELECT> button
Switches the input signal to project. (x page 41)
9 asqw buttons
9 asqw buttons
Navigates the menu screen.
Adjusts the volume level (qw).
Navigates the menu screen.
Adjusts the volume level (qw).
10 <AUTO SETUP> button
Automatically adjusts the image display position while
10 <AUTO SETUP> button
projecting the image. (x page 40)
Automatically adjusts the image display position while
projecting the image. (x page 40)
16
16
ENGLISH - 21