Serial No. Setting - Panasonic PT-VZ570 Service Manual

SECTION 3 ADJUSTMENTS

1. 4. Serial no. setting

1. 4. 1. Equipment to be used
1. Computer : Use it for the product serial number setting.
2. Communication cable : D-sub 9pin (male/female RS-232C straight)
3. Service Software : "ServiceVZ570" Service software is downloaded from the projector service homepage.
1. 4. 2. Connection preparations
1. Connect the serial terminals on the projector and the
PC by using a communication cable.
1. 4. 3. Serial number writing
1. Set the projector to "Normal-Standby" mode (ON(G)/
STANDBY(R) indicator is lighting in red).
2. Start up the software "ServiceVZ570.exe" with a PC.
3. Select language and click the [OK] button.
4. 1) Choose the available serial port number on your PC.
2) Choose a model number.
3) Click the [Data] button.
5. 1) Click the [Serial number] button.
2) Input the valid serial number and click [Send] button.
j
6. After completing the setting, turn the projector off and on, and check that the correct serial number is set on screen menu
"STATUS"-"SERIAL NO.".
j k
l
Projector Connection terminals
D-Sub 9p (Female)
D-Sub 9p (Male)
k
ADJ-8
Computer
Communication cable (straight)