SECTION 2 DISASSEMBLY PROCEDURES
3.7. Parts location and direction in the lighting case
When mounting or assembling the parts in the lighting case, the parts must be mounted in the speci-
fied location and direction as shown in the figure below.
Note: The parts indicated with (*) are mounted by adhesive, therefore, they cannot be replaced
individually.
Marking comes this
side up
Dichroic mirror B
Marking comes this
side up
Dichroic mirror (G)
Relay lens(IN)
Mirror (R)
Coated side comes
reflection side
Coated side comes
reflection side
DIS-19
Mirror (B)*
Condenser lens (G/B)
Condenser lens (G/B)
Relay lens(IN)
Mirror (R)
Relay lens(OUT)*