Setting The Lens Type; Moving The Projection Lens To The Home Position - Panasonic PT-RCQ80 Operating Instructions Manual

Hide thumbs Also See for PT-RCQ80:
Table of Contents

Advertisement

Note
f The projected image size and scale shown on the periphery focus adjustment ring are an approximate guide.
f Set the [PROJECTOR SETUP] menu → [LENS] → [LENS TYPE] to [ET-DLE035] when using the Fixed-focus Lens (Model No.:
ET-DLE035).

Setting the lens type

If the projection lens is replaced, confirm the [LENS TYPE] setting. Change the setting if the lens type does not
match the projection lens attached to the projector.
1)
Press the <MENU> button.
f The [MAIN MENU] screen is displayed.
2)
Press as to select [PROJECTOR SETUP].
3)
Press the <ENTER> button.
f The [PROJECTOR SETUP] screen is displayed.
4)
Press as to select [LENS].
5)
Press the <ENTER> button.
f The [LENS] screen is displayed.
6)
Press as to select [LENS TYPE].
7)
Press qw to switch the item.
f The items will switch each time you press the button.
[NORMAL]
[ET-DLE035]
[ET-DLE020]

Moving the projection lens to the home position

Operate in following procedure to move the projection lens to the home position.
When operating from the main menu
1)
Press the <MENU> button.
f The [MAIN MENU] screen is displayed.
2)
Press as to select [PROJECTOR SETUP].
3)
Press the <ENTER> button.
f The [PROJECTOR SETUP] screen is displayed.
4)
Press as to select [LENS].
5)
Press the <ENTER> button.
f The [LENS] screen is displayed.
6)
Press as to select [LENS HOME POSITION].
7)
Press the <ENTER> button.
f The confirmation screen is displayed.
8)
Press qw to select [OK], and press the <ENTER> button.
f The projection lens is moved to the home position.
Note
f [PROGRESS] is displayed in the menu while the projection lens is moved to the home position.
f The projection lens is not moved to the correct home position when the [PROJECTOR SETUP] menu → [LENS] → [LENS TYPE] is set
incorrectly. Change the setting if the type does not match the projection lens attached to the projector.
f The home position does not match with the optical image center position.
f The home position varies depending on the projection lens type. Refer to "Lens shift range" (x page 80) for details.
Chapter 3 Basic Operations — Projecting
Select this item when a projection lens anything other than the Zoom Lens (Model No.: ET-DLE020)
or Fixed-focus Lens (Model No.: ET-DLE035) is used for projection.
Select this item when the Fixed-focus Lens (Model No.: ET-DLE035) is used for projection.
Select this item when the Zoom Lens (Model No.: ET-DLE020) is used for projection.
ENGLISH - 79

Advertisement

Table of Contents
loading

Table of Contents