Replace Sib Board; Replace Sr - Garland GSL4S Installation, Operation And Maintenance Manual

Replace SIB
1. Open front panel
2. For GSL4S, remove chute assembly
. (Please see REMOVE CHUTE ASSEMBLY instruction
for detail)
3. Disconnect all wires on the SIB
4. Remove screws on the SIB
5. Replace new SIB
6. Re-assemble all parts back.

Replace SR

1. Open front panel
2. For GSL4S, remove chute assembly
(Please see REMOVE CHUTE ASSEMBLY instruction for
detail)
3. Disconnect wire connected to griddle assembly.
4. Remove nuts for electric assembly bracket
5. Lift the front end and Move bracket out slowly.
6. Remove wire on the SR
7. Remove nut and bolt and replace SR
8. Reconnect wire and insert electric asm bracket into holding
bracket.
9. Reconnect wires and put nuts back.
27