Advertisement
Step 3
Remove the plastic cover from the unit. Locate and
disconnect the throttle wire from the controller.
Step 5
Using a 4 mm Allen wrench, remove two (2) hex screws
and pull the bracket out of the frame.
Need Help? Visit our website at www.razor.com or call toll-free at 866-467-2967 Monday - Friday 8:00am - 5:00pm Pacific Time.
Step 4
Remove the grommet from the metal bracket. Push the
throttle wire inside the opening.
Step 6
Remove the controller cover to access the wires.
Remove the grommet at the back of the tray.
2
Advertisement
